Shenzhen Eastlonge Electronics Factory
Main products:Repeater,Detector
Products
Contact Us
  • Contact Person : Ms. Ding Tina
  • Company Name : Shenzhen Eastlonge Electronics Factory
  • Tel : 0086-755-29809527-603
  • Fax : 0086-755-28131511
  • Address : Guangdong,shenzhen,4/F,Buildingn 6 of Hebei Industry Park, Longhua Town
  • Country/Region : China
  • Zip : 518109

EST-101A cellphone signal detector

EST-101A cellphone signal detector
Product Detailed
EST-101A cellphone signal detector 1.Detect the cellphone signal of CDMA, GSM, DCS, PHS & 3G. 2.Detector range: 20M                                      EST-101A cellphone signal  detectotrTechnical parametersTX Frequency

Output port

Frequency

Average out-putting power

Channel out-putting power

CDMA

824MHz-849MHz

30dBm

3dBm/30KHz(min)

GSM

890MHz-915MHz

30dBm

3dBm/30KHz(min)

DCS

1710MHz-1785MHz

30dBm

3dBm/30KHz(min)

PHS/3G

1920MHz-1980MHz

30dBm

3dBm/30KHz(min)

     Each frequency band has a corresponding antenna, so there are 4 antennas on the equipment.Jamming range of the signal detector : 5-20M (It still depends on the strength signal in given area)The green light on means the main system work well, the red light on shows that the RF inspecting system works well.When the detector is working, the TTL signal and RS-485 communication signal are output by the system.Sentivity of the signal detector : Adjusted knobs, independent frequency.Caboodle Management : coding orientationTemperature : -40°C~ 55°CReceiving Antenna : Plastic antennasWorking Voltage : Input AC 110V ~ 240V  50/60 Hz                             Output DC 5V  2ADimension : 230*85*30mmWorking Time : It can work stably for a long timeEnvironment Temperature : -20°C ~ 65°CRelative humility : 30% ~ 70% Installation and operation instruction  3.1 Take out the detector from the packaging.  3.2 Screw the antennas into the corresponding antennas seats repectivelt, otherwise they will be useless.  3.3 Hang the detector onto the wall. (Setting height ≥2M)  3.4 Insert the AC plug into the socket, then switch on. When  the power indicator is lit, it means that the device starts working. (Different detector should be with different battery.) 

EST-101A cellphone signal detector



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.